JCTKJCTMedium Airport

Kimble County Airport

Junction, United States1,749 ft elevation

Plan transport

IATA

JCT

Three-letter passenger code.

ICAO

KJCT

Operational aviation identifier.

Elevation

1,749 ft

The elevation is typical for the region.

Coordinates

30.51, -99.76

Junction map position.

Airport scale

Regional Airport

The airport is easier to read than the largest hubs, but schedules can cluster around regional arrival and departure waves.

Kimble County Airport overview

Kimble County Airport (JCT) serves Junction, United States. It is listed as a regional airport, so this guide focuses on practical location context, airport identifiers, nearby alternates, and the details travelers can verify before planning a route through JCT.

The airport sits at 1,749 feet above sea level. Its coordinates are 30.5113, -99.7635, which helps travelers compare the airport with city access points and other airports in United States.

Nearby alternatives include Curtis Field (BBD) and Kerrville / Kerr County Airport at Louis Schreiner Field (ERV). Compare those pages when checking backup airports, local access, or regional routing across North America.

JCT planning callout

For North American airports, parking, rental-car shuttles, and rideshare pickup zones can add meaningful curb-to-gate time. For this page, compare JCT with nearby airport links and the United States country guide before finalizing route choices.

Kimble County Airport unique facts

JCT fact 1

Kimble County Airport uses IATA code JCT and ICAO code KJCT.

JCT fact 2

JCT serves Junction in United States.

JCT fact 3

In this directory, it ranks #932 by estimated passenger scale among listed United States airports.

JCT fact 4

Across North America, this airport ranks #1107 in the current featured airport set.

JCT fact 5

Kimble County Airport is classified as a regional airport, based on airport type and available passenger estimates.

JCT fact 6

JCT sits 1,749 feet above sea level.

Kimble County Airport facilities

Kimble County Airport restaurants

At JCT, check whether dining is concentrated landside or airside before settling near the gate.

JCT lounges

For Kimble County Airport, lounge access usually depends on airline, alliance status, cabin, or paid-entry rules.

JCT WiFi

Use airport WiFi for maps, airline alerts, and transport bookings before leaving Kimble County Airport.

Junction airport parking

For departures from Junction, compare terminal-adjacent parking with long-stay lots and shuttle timing.

JCT accessibility

Request mobility assistance with your airline before traveling through Kimble County Airport; same-day help can be slower at peak times.

JCT ATMs

ATMs are most useful for small arrival cash needs in United States; compare fees before withdrawing large amounts.

JCT currency exchange

Currency desks at Kimble County Airport are convenient after arrival, but city rates may be better for larger exchanges.

JCT car rental

Save JCT as your return point and follow airport rental-car signs rather than only city directions.

Kimble County Airport airport hotels

Airport hotels near Kimble County Airport are useful for early departures, long layovers, and weather-sensitive connections.

JCT medical help

For urgent health needs at JCT, ask airport staff for first aid or the nearest medical room.

JCT charging

At Kimble County Airport, charge devices before boarding if you rely on mobile boarding passes, maps, or rideshare pickup.

JCT business travel

Kimble County Airport business travelers should verify lounge, workspace, and fast-track options before peak departure waves.

JCT family travel

Families using JCT should confirm stroller rules, family rooms, and walking distances before security.

Kimble County Airport transportation

JCT taxi and rideshare

Taxi or rideshare is the simplest choice at JCT when arriving late or carrying luggage into Junction.

JCT train or metro

If rail is available at Kimble County Airport, compare it against traffic-sensitive road transfers before choosing a taxi.

JCT bus and coaches

Bus service is usually the best-value option for Junction, but confirm stop location and operating hours for early departures from JCT.

JCT driving and car rental

For rental cars, save the airport code JCT in navigation and follow terminal-specific return signs rather than only city-center directions.

Kimble County Airport location

JCT

Kimble County Airport

30.5113, -99.7635

Curtis Field

85 km from JCT

Kerrville / Kerr County Airport at Louis Schreiner Field

88 km from JCT

LBJ Ranch Airport

113 km from JCT

San Angelo Regional Mathis Field

117 km from JCT

Kimble County Airport traveler tips

JCT tip 1

Check the departure board before settling in; smaller schedules can cluster around a few busy waves.

JCT tip 2

Weather delays are usually more tied to regional systems than airport elevation.

JCT tip 3

Confirm ground transport availability for late arrivals, especially outside the main city center.

JCT tip 4

For photos and window views, note the field orientation around 30.51 latitude and -99.76 longitude.

JCT tip 5

If flying general aviation or charter, verify operating hours, handling, and fuel availability before departure.

JCT tip 6

For North American airports, parking, rental-car shuttles, and rideshare pickup zones can add meaningful curb-to-gate time.

Kimble County Airport FAQ

Where is Kimble County Airport located?

Kimble County Airport (JCT) is located in Junction, United States, at coordinates 30.5113, -99.7635.

What is the IATA code for Kimble County Airport?

The IATA code for Kimble County Airport is JCT. Its ICAO code is KJCT.

Is Kimble County Airport a large airport?

Kimble County Airport is classified as a medium airport in the OurAirports dataset and reads as a regional airport in this guide. The airport is easier to read than the largest hubs, but schedules can cluster around regional arrival and departure waves.

How early should I arrive at JCT?

For Kimble County Airport, arrive earlier during morning and evening departure banks. International travelers should generally plan more buffer than domestic travelers, especially if bags or document checks are involved.

What elevation is Kimble County Airport?

Kimble County Airport is 1,749 feet above sea level; The elevation is typical for the region..

Does Kimble County Airport have scheduled airline service?

Kimble County Airport is marked as not having scheduled service in the current airport dataset.

What city does JCT serve?

JCT primarily serves Junction and the surrounding region.

Are there nearby airports to JCT?

Nearby comparison airports include Curtis Field (BBD) and Kerrville / Kerr County Airport at Louis Schreiner Field (ERV).

What transport should I check first at JCT?

For North American airports, parking, rental-car shuttles, and rideshare pickup zones can add meaningful curb-to-gate time. For Kimble County Airport, compare fixed-link transit, official taxis, rideshare pickup, and hotel transfer options before arrival.

Kimble County Airport related airports

ABE

Lehigh Valley International Airport

Allentown/Bethlehem, United States

Type

Medium Airport

Elevation

393 ft

North AmericaGuide

ABI

Abilene Regional Airport

Abilene, United States

Type

Medium Airport

Elevation

1,791 ft

North AmericaGuide

ABL

Ambler Airport

Ambler, United States

Type

Medium Airport

Elevation

334 ft

North AmericaGuide

ABR

Aberdeen Regional Airport

Aberdeen, United States

Type

Medium Airport

Elevation

1,302 ft

North AmericaGuide

Explore more airports near Junction

Compare nearby airports, country guides, and continent directories for smarter itinerary planning.

Browse airports